Backing up and restoring HP Insight Management 7.3 Central Management Server (Windows)

Technical white paper | HP Insight Management 7.3
An example of the error follows:
To verify that this error is due to added or removed VC modules, you can check the details of the failed job in the VCEM job
table. Select
Tools

Integrated Consoles

Virtual Connect Enterprise Manager (VCEM)
in Systems Insight Manager. Click
the
Jobs
tab to view the status of jobs. Look for a recently failed domain maintenance task. Double-click the task to view the
details. If the synchronization step failed because VC modules were added or removed as a post-backup activity, you will
see a message like the following:
The cabinet or VC modules installed in the enclosure [x] interconnect bays of VC
Domain [y] do not match the counterpart enclosure of the VC Domain Group.
You may see a different error message in this situation, or in situations in which a VCDG was deleted and re-created as a
post-backup activity:
Error during VC domain [y] maintenance. Details: VCEM cannot perform the requested
operation because the VC domain [y] is not under maintenance.
Important:
You will not be able to complete the
VCEM Synchronization
section until all added and removed VC modules are processed
successfully.
The manual steps for resynchronizing the restored VCEM database follow:
1. Identify the VC Domain Groups with this error in VCEM.
2. For each VC Domain Group with this error:
A. Record the VC Domain Group configuration settings, including the name of the VC Domain Group, the VC Domains
in the domain group, and the MAC, WWN, and logical serial number ranges.
B. Delete the VC Domain Group from VCEM.
C. Use the Virtual Connect Manager command-line utility to release the external manager lock. For details about
releasing the external manager lock, see the HP Virtual Connect Enterprise Manager User Guide.
**** Execution: Domain synchronization ****
**** Section 2 of 5, phase 2 of 2 ****
This may take a few minutes ...
Synchronizing VC Domain Val-Encl3-Vc ........
Synchronize VC Domain Val-Encl3-Vc in VCEM........................[ERROR]
ERROR: Unable to synchronize VC Domain Val-Encl3-Vc
Synchronizing VC Domain Matrix-Encl4-Vc ...............................
Synchronize VC Domain Matrix-Encl4-Vc in VCEM........................[OK]
Execution summary:
2 actions performed
0 advisories
1 error
Execution failed. A successful execution is necessary, before proceeding to
the next phase of synchronization. You can choose to repeat analysis and
execution for this phase (Domain synchronization) or stop the
synchronization
process. If the synchronization process is stopped, it can be restarted
later.
>>> Would you like to repeat this synchronization phase? (Y/N): y
79