HP Insight Management Agent 8.40 Microsoft Windows Event ID and SNKP Traps Reference Guide

Server agents 117
Supporting SNMP Trap Description: “Server power on prevented to preserve redundancy in blade
[cpqRackServerBladePosition], in enclosure [cpqRackServerBladeEnclosureName], in rack
[cpqRackName].”
NT Event ID: 1165 (Hex)0xc435048d (cpqsvmsg.dll)
Log Severity: Error (3)
Event Title: Not Enough Power To Power On
Log Message: Inadequate power to power on.
SNMP Trap: cpqRackServerPowerOnFailedNotEnoughPower - 22023 in CPQRACK.MIB
Symptom: Inadequate power to power on. There is not enough power to power on the server blade.
User Action: Check power connections or add power supplies.
Supporting SNMP Trap Data:
• sysName
• cpqHoTrapFlags
• cpqRackName
• cpqRackUid
• cpqRackServerBladeEnclosureName
• cpqRackServerBladePosition
• cpqRackServerBladeSparePartNumber
• cpqRackCommonEnclosureSerialNum
• cpqRackCommonEnclosureTrapSequenceNum
Supporting SNMP Trap Description: “Inadequate power to power on blade
[cpqRackServerBladePosition], in enclosure [cpqRackServerBladeEnclosureName], in rack
[cpqRackName].”
NT Event ID: 1166 (Hex)0xc435048e (cpqsvmsg.dll)
Log Severity: Error (3)
Event Title: Inadequate Power To Power On
Log Message: There is not enough power to power on the server blade. The server enclosure micro-
controller was not found.
SNMP Trap: cpqRackServerPowerOnFailedEnclosureNotFound - 22024 in CPQRACK.MIB
Symptom: Inadequate power to power on. There is not enough power to power on the server blade.
The server enclosure micro-controller was not found.
User Action: Check server enclosure connections or add power supplies.
Supporting SNMP Trap Data:
• sysName
• cpqHoTrapFlags
• cpqRackName
• cpqRackUid
• cpqRackServerBladeEnclosureName
• cpqRackServerBladePosition
• cpqRackServerBladeSparePartNumber