HP Insight Management Agent 8.40 Microsoft Windows Event ID and SNKP Traps Reference Guide

Server agents 124
• cpqRackCommonEnclosureTrapSequenceNum
Supporting SNMP Trap Description: “Power subsystem has been improperly configured in enclosure
[cpqRackCommonEnclosureName], in rack [cpqRackName].”
NT Event ID: 1179 (Hex) 0x8435049B (cpqsvmsg.dll)
Log Severity: Warning (2)
Log Message: The Management Processor is in reset state. The data contains the error code
SNMP Trap: cpqHeManagementProcInReset - 6061 in CPQHLTH.MIB
Symptom: The Management processor is currently in reset. The management processor is currently in
the process of being reset because of a firmware update or some other event.
User action: None
Supporting SNMP Trap Data:
• sysName
• cpqHoTrapFlags
Supporting SNMP Trap Description: “The Management processor is in the process of being reset.”
NT Event ID: 1180 (Hex) 0x0435049c (cpqsvmsg.dll)
Log Severity: Informational (1)
Log Message: The Management Processor has successfully reset and is now available again. The
data contains the error code.
SNMP Trap: cpqHeManagementProcReady - 6062 in CPQHLTH.MIB
Symptom: The Management processor is ready. The management processor has successfully reset and
is now available again.
User action: None
Supporting SNMP Trap Data:
• sysName
• cpqHoTrapFlags
Supporting SNMP Trap Description: “The Management processor is ready after a successfull reset”
NT Event ID: 1181 (Hex) 0x8435049D (cpqsvmsg.dll)
Log Severity: Warning (3)
Log Message: The Management Processor has not reset successfully and is not operational. The data
contains the error code.
SNMP Trap: cpqHeManagementProcFailedReset - 6063 in CPQHLTH.MIB
Symptom: The Management processor failed reset. The management processor was not successfully
reset and is not operational.
User action: Reset the management procesessor again or re-flash the management processor
firmware.
Supporting SNMP Trap Data:
• sysName
• cpqHoTrapFlags
Supporting SNMP Trap Description: The Management processor failed reset.