HP Insight Management Agent 8.40 Microsoft Windows Event ID and SNKP Traps Reference Guide

Server agents 126
Log Severity: Error (3)
Log Message: Unable to load a required driver. This error can be caused by a corrupt or missing file.
Reinstalling the Server Agents, the software support drivers, or running the Emergency Repair
procedure may correct this error.
Event identifier: cpqsvmsg.dll - 1544 (Hex)0x84350608 (Service Event)
Log Severity: Warning (2)
Log Message: Unable to read from the registry. This error can be caused by a corrupt registry or a
low memory condition. Rebooting the server may correct this error.
Event identifier: cpqsvmsg.dll - 1574 (Hex)0xc4350626 (Service Event)
Log Severity: Error (3)
Log Message: Could not write the registry sub-key: “%1”. This error can be caused by a corrupt
registry or a low memory condition. Rebooting the server may correct this error.
Event identifier: cpqsvmsg.dll - 1792 (Hex)0x84350700 (Service Event)
Log Severity: Warning (2)
Log Message: The Server SNMP Agent is unable to generate traps due to an error during
initialization.
Event identifier: cpqsvmsg.dll - 1795 (Hex)0x84350703 (Service Event)
Log Severity: Warning (2)
Log Message: The SNMP Agent is older than other components. The SNMP Agent is older than the
other components of the Server Agents. Reinstall the entire Server Agents package to correct this
error.
Event identifier: cpqsvmsg.dll - 1796 (Hex)0x84350704 (Service Event)
Log Severity: Warning (2)
Log Message: The %1 Agent is older than other components. The %1 Agent is older than the other
components of the Server Agents. Reinstall the entire Server Agents package to correct this error.
Event identifier: cpqsvmsg.dll - 1800 (Hex)0x84350708 (Service Event)
Log Severity: Warning (2)
Log Message: Unable to read security configuration information. SNMP sets have been disabled.
Event identifier: cpqsvmsg.dll - 1803 (Hex)0xc435070b (Service Event)
Log Severity: Error (3)
Log Message: Unable to load a required library. This error can be caused by a corrupt or missing
file. Reinstalling the Server Agents or running the Emergency Repair procedure may correct this error.
Event identifier: cpqsvmsg.dll - 1806 (Hex)0x8435070e (Service Event)
Log Severity: Warning (2)
Log Message: The Server Agent service is not running. The Server SNMP Agent has determined that
the Server Agent service is not running. Stop the SNMP service and restart the Server Agents service.
If the error persists, reinstalling the Server Agents may correct this error.
Event identifier: cpqsvmsg.dll - 1808 (Hex)0x44350710 (Service Event)
Log Severity: Information (1)