HP Insight Management Agent 8.40 Microsoft Windows Event ID and SNKP Traps Reference Guide

Storage agents 60
• cpqTapeLibraryFwRev
• cpqTapeLibrarySerialNumber
• cpqTapeLibraryState
Supporting SNMP Trap Description: “Status is now [cpqTapeLibraryState].”
NT Event ID: 1192 (Hex)0x843504a8 (cpqstmsg.dll)
Log Severity: Warning (2)
Event Title: SCSI Tape Drive Status Change.
Log Message: The tape drive with SCSI target %6 connected to SCSI bus %5 of the controller in slot
%4 has a new status of %2.
SNMP Trap: cpqTape5PhyDrvStatusChange - 5019 in CPQSCSI.MIB
Symptom: Tape Drive Status Change. The Storage Agent has detected a change in the status of a
tape drive. The current physical drive status is indicated in the cpqTapePhyDrvStatus variable.
Supporting SNMP Trap Data:
• sysName
• cpqHoTrapFlags
• cpqTapePhyDrvCntlrIndex
• cpqTapePhyDrvBusIndex
• cpqTapePhyDrvScsiIdIndex
• cpqTapePhyDrvLunIndex
• cpqTapePhyDrvName
• cpqTapePhyDrvFwRev
• cpqTapePhyDrvSerialNumber
• cpqTapePhyDrvStatus
Supporting SNMP Trap Description: “Status is now [cpqTapePhyDrvStatus].”
NT Event ID: 1193 (Hex)0x843504a9 (cpqstmsg.dll)
Log Severity: Warning (2)
Event Title: External Tape Drive Status Change.
Log Message: The tape drive at location “%4”, has a new status of %7.
SNMP Trap: cpqExtTapeDriveStatusChange - 16023 in CPQFCA.MIB
Symptom: External Tape Drive Status Change. This trap indicates that the agent has detected a
change in the status of an External Tape Drive. The variable cpqFcTapeDriveStatus indicates the
current tape status.
User Action: If the tape is failed or is offline, check the tape and all connections.
Supporting SNMP Trap Data:
• sysName
• cpqHoTrapFlags
• cpqFcTapeDriveCntlrIndex
• cpqFcTapeDriveScsiBus
• cpqFcTapeDriveScsiTarget
• cpqFcTapeDriveScsiLun