HP Insight Management Agents 9.10 Managing ProLiant Servers with Linux HOW TO Whitepaper

Table 15 cpqriisd messages (continued)
DetailsMessage Number
with the HP ProLiant Rack Daemon (cmarackd). Restart cmarackd.
If the problem persists, contact your HP field service engineer.
iLO exceeded the number of allotted back offs, is it stuck?Message 7
iLO responds with a “backoff” command indicating a busy state,
which is a temporary
Description
condition. If this condition lasts too long (5000 tries), the message
appears.
Verify that iLO is not under extreme network load, such as a ping
flood. Otherwise, contact your HP field service engineer.
Recommended action
Data returned is too short for any transactionMessage 8
Data corruption from iLO has occurred. The data received is
ignored.
Description
Reboot iLO by navigating to the Network Settings tab in the iLO
Web interface and clicking Apply. If you continue to see this
message, contact your HP field service Engineer.
Recommended action
watchdog sees no dispatch threadsMessage 9
cpqci watchdog: close channel!
cpqci watchdog: reopen channel!
These messages indicate that iLO was reset and that the service is
trying to reopen communication.
Description
No action is required, since this message is informational.Recommended action
Problems setting up shared memoryMessage 10
Problems setting up semaphores
Problems setting up local semaphore
Problems setting up watchdog thread
Problems setting up IPMI channel
Problems setting up dispatch thread
Problems setting up secondary dispatch thread
Problems setting up dispatch threads
Did not receive initial handshake
Problem pushing IPMI traffic over channel!
Problems setting up dispatch data
Problems setting up stats data
Problems setting up dynamic mem allocator!
Problems setting up hash table!
Problems setting up communication over channel!
Problems setting up watchdog thread!
29