Microsoft Windows Event ID and SNMP Traps Reference Guide

Supporting SNMP Trap Description: “Storage System temperature status changed to
[cpqSsBoxTempStatus].”
NT Event ID: 1214 (Hex)0x843504be (cpqstmsg.dll)
Log Severity: Warning (2)
Event Title: Storage System Fault Tolerant Power Supply Status Change.
Log Message: The fault tolerant power supply in the %6 %7 storage system connected to SCSI bus
%5 of the controller in %4 has a new status of %2.
SNMP Trap: cpqSs5PwrSupplyStatusChange - 8028 in CPQSTSYS.MIB
Symptom: Storage System Fault Tolerant Power Supply Status Change. The agent has detected a
change in the power supply status of a storage system. The variable cpqSsBoxFltTolPwrSupplyStatus
indicates the current power supply status.
User Action: If the power supply status is degraded, restore power or replace the failed power
supply.
Supporting SNMP Trap Data:
• sysName
• cpqHoTrapFlags
• cpqSsBoxCntlrHwLocation
• cpqSsBoxCntlrIndex
• cpqSsBoxBusIndex
• cpqSsBoxVendor
• cpqSsBoxModel
• cpqSsBoxSerialNumber
• cpqSsBoxFltTolPwrSupplyStatus
Supporting SNMP Trap Description: “Storage system power supply status changed to
[cpqSsBoxFltTolPwrSupplyStatus].”
NT Event ID: 1215 (Hex)0x843504bf (cpqstmsg.dll)
Log Severity: Warning (2)
Event Title: Fibre Channel Controller Status Change.
Log Message: The Fibre Channel Controller in %4 has a new status of %5.
SNMP Trap: cpqFca3HostCntlrStatusChange - 16028 in CPQFCA.MIB
Symptom: Fibre Channel Host Controller Status Change. This trap indicates that the agent has
detected a change in the status of a Fibre Channel Host Controller. The variable
cpqFcaHostCntlrStatus indicates the current controller status.
User Action: If the controller status is failed, replace the controller.
Supporting SNMP Trap Data:
• sysName
• cpqHoTrapFlags
• cpqFcaHostCntlrHwLocation
• cpqFcaHostCntlrIndex
• cpqFcaHostCntlrStatus
• cpqFcaHostCntlrModel
• cpqFcaHostCntlrSerialNumber
Event Identifiers 1200-1294 65