Using the HP Rapid Deployment Pack 3.7 to Deploy Microsoft Windows Server 2003 for IA64

Customizing the Read Integrity RX/BL System and Array Configuration and Linux
Image {LinuxPE} job
1. Select the Read Integrity RX/BL System and Array Configuration and Linux Image
{LinuxPE} job. The job frame in the right pane displays the job tasks.
2. The Create Disk Image task runs in both Windows and LinuxPE. Ensure that ACPI Mode
is set to Linux before the Create Disk Image task runs. Copy and paste the Set ACPI to
Linux task before the Create Disk Image task, and paste the Set ACPI to Windows task
after it. In the following example, the task is placed after the Set ACPI to Windows task,
but before the remaining tasks, so if one of the remaining tasks fails the system can boot to
Windows.
Running Read Image jobs from LinuxPE
A customized job from the Read Image jobs group can be applied to an Integrity mid-range or
high-end system booted to LinuxPE if:
• The target system is powered on and running one of the following Windows operating
systems:
— Windows Server 2003 SP1 or SP2, Enterprise Edition for IA64
— Windows Server 2003 SP2, DataCenter Edition for IA64
• The HP ISP 5.2 package or later is installed.
• The target system boots the EFI Boot entry by default.
• The Deployment Agent for Windows is installed and connected to the Altiris Deployment
Server.
• The job is applied immediately after the Set ACPI Mode to Windows {LinuxPE} job.
Bare-metal target systems
Two groups of jobs typically applied to bare-metal systems are the following:
Bare-metal target systems 25