A.05.80 HP Insight Remote Support Advanced and Remote Device Access Security Overview (October 2012)

ProLiant Windows Server Managed Systems
Table C.15. ProLiant Windows Server Connectivity - Firewall/Port Requirements
Protocol Ports Source Destination Function Configurable Optional
TCP 5989 CMS Managed
Systems
Secured WBEM CI-MOM protocol over HTTPS/SOAP.
This port is used to communicate with WBEM end point
nodes.
Yes Required
TCP 135 Managed
Systems
CMS DCE endpoint resolution. Used by DCOM, and hence,
Windows Management Interface (WMI) and WEBES
No Required
TCP 139 Managed
Systems
CMS NETBIOS Session Service. Used by DCOM, and hence,
Windows Management Interface (WMI) and WEBES
No Required
TCP 7906 Managed
Systems
CMS Secure HTTP (HTTPS) port used by the listener running in
the Director's Web Interface. The Web browser connects to
this port in the URL (e.g.
https://target.sys.name.here:7906)
No Required
TCP 50001 Managed
Systems
CMS HP SIM HTTPS/SOAP No Required
TCP 50002 Managed
Systems
CMS HP SIM HTTPS/SOAP with client certificate authentication No Required
TCP 50004 Managed
Systems
CMS WBEM event receiver (HTTP and HTTPS) Yes Required
TCP 1024-
65535
Managed
Systems
CMS Windows Server 2003 Windows Management Interface
(WMI) Communications DCOM dynamic port assignment.
Note that the CMS can be configured to limit this range.
The source port will always be 135.
No Required
TCP 49152-
65535
Managed
Systems
CMS Windows Server 2008 Windows Management Interface
(WMI) Communications DCOM dynamic port assignment.
No Required
HP Insight Remote Support Advanced and Remote Device Access (A.05.80)Page 73 of 97
Security Overview
Appendix C: Summary of Network Ports for Servers