HP iLO 3 Release Notes 1.
© Copyright 2014 Hewlett-Packard Development Company, L.P Confidential computer software. Valid license from HP required for possession, use or copying. Consistent with FAR 12.211 and 12.212, Commercial Computer Software, Computer Software Documentation, and Technical Data for Commercial Items are licensed to the U.S. Government under vendor's standard commercial license. The information contained herein is subject to change without notice.
Description The HP iLO 3 firmware enables you to configure, update, and operate servers remotely. You can use iLO 3 with a browser-based interface, or a RBSU. For more information, see the HP iLO 3 User Guide. Many tools and syntaxes support iLO 3. For more information, see the HP iLO 3 Scripting and Command Line Guide. Some iLO 3 features are licensed features and can only be accessed after purchasing an optional license. For information, see the HP website at http://www.hp.com/go/ilo/licensing.
Devices supported • HP ProLiant BL685c G7 Server • HP ProLiant BL680c G7 Server • HP ProLiant BL620c G7 Server • HP ProLiant BL490c G7 Server • HP ProLiant BL465c G7 Server • HP ProLiant BL460c G7 Server • HP ProLiant BL2x220c G7 Server • HP ProLiant DL585 G7 Server • HP ProLiant DL580 G7 Server • HP ProLiant DL385 G7 Server • HP ProLiant DL380 G7 Server • HP ProLiant DL360 G7 Server • HP ProLiant DL120 G7 Server • HP ProLiant ML110 G7 Server • HP ProLiant ML10 G7 Server • HP
• iLO 3 1.50 and later does not send ARP before replying to a ping request. This causes iLO 3 to be unreachable to pings from clients with teamed NICs. • c-Class blade servers might request maximum power when the server is powered on. Prerequisites • iLO 3 1.2x must be installed before you can update to iLO 3 1.61 or later. • If you use any of the following utilities, update them to the versions shown below. The minimum versions are required for IPv6 support.
Support • HP iLO 3 firmware updates and utilities can be found here: http://www.hp.com/support/ilo3 • • HP iLO 3 1.
