HP iLO 3 User Guide

The following information is displayed:
• Processor Speed—The speed of the processor
• Execution Technology—Information about the processor cores and threads
• Memory Technology—The processor memory capabilities
• Internal L1 cache—The L1 cache size
• Internal L2 cache—The L2 cache size
• Internal L3 cache—The L3 cache size
Viewing memory information
The Memory Information page displays a list of the memory modules in the host that are installed
and operational at POST. In some systems with large memory module populations, all module
positions might not be listed.
If the server is powered off, the system health information on this page is current as of the last
power off. Health information is updated only when the server is powered on and POST is complete.
To view memory information, navigate to the Information→System Information page, and then
click the Memory tab, as shown in Figure 50 (page 104).
Figure 50 System Information – Memory Information page
The following information is displayed:
• Memory Component—The memory module location.
• Status—The memory size and frequency. If a module is not installed, the value Not installed
is displayed.
Viewing network information
The NIC Information page displays read-only information about the integrated NICs.
If the server is powered off, the system health information on this page is current as of the last
power off. Health information is updated only when the server is powered on and POST is complete.
To view NIC information, navigate to the Information→System Information page, and then click
the NIC Information tab, as shown in Figure 51 (page 105).
104 Using iLO