HP iLO 3 User Guide

Using iLO Virtual Media from the iLO web interface
The Virtual Media page allows you to perform the following tasks:
• View or change the Virtual Media port.
You can also change the port on the Administration→Access Settings page.
• View or eject local media, including locally stored image files, floppy disks, USB keys,
CDs/DVD-ROMs, and virtual folders.
• View, connect, eject, or boot from scripted media. Scripted media refers to connecting images
hosted on a web server by using a URL. iLO will accept URLs in HTTP or HTTPS format. FTP is
not supported.
Viewing and modifying the Virtual Media port
The Virtual Media port is the port that iLO uses to listen for incoming local Virtual Media connections.
The default value is 17988.
You must have the Configure iLO Settings privilege to change the Virtual Media port.
To change the Virtual Media port:
1. Navigate to the Virtual Media→Virtual Media page, as shown in Figure 72 (page 135).
Figure 72 Virtual Media page
2. Enter a new port number in the Virtual Media Port box.
3. Click Change Port.
The system prompts you to reset iLO.
4. Click OK.
Using iLO Virtual Media 135