HP iLO 3 User Guide

After the snap-ins are installed, iLO objects and iLO roles can be created in the directory. By using
the Active Directory Users and Computers tool, the user completes the following tasks:
• Creates iLO and role objects
• Adds users to the role objects
• Sets the rights and restrictions of the role objects
NOTE: After the snap-ins are installed, ConsoleOne and MMC must be restarted to show the
new entries.
Active Directory snap-ins
The following sections discuss the additional management options available in Active Directory
Users and Computers after the HP snap-ins have been installed.
HP Devices tab
The HP Devices tab (Figure 89) enables you to add the HP devices to be managed within a role.
Clicking Add enables you to navigate to an HP device and add it to the list of member devices.
Clicking Remove enables you to navigate to an HP device and remove it from the list of member
devices.
Figure 89 HP Devices tab
Members tab
After user objects are created, the Members tab (Figure 90) enables you to manage the users
within the role. Clicking Add enables you to navigate to the user you want to add. Highlighting
an existing user and clicking Remove removes the user from the list of valid members.
178 Directory services