HP iLO 3 User Guide

hpqTargetMembership
1.3.6.1.4.1.232.1001.1.1.2.3OID
Provides a list of hpqTarget objects that belong to this objectDescription
Distinguished Name - 1.3.6.1.4.1.1466.115.121.1.12Syntax
MultivaluedOptions
NoneRemarks
hpqRoleIPRestrictionDefault
1.3.6.1.4.1.232.1001.1.1.2.4OID
A Boolean that represents access by unspecified clients and that partially
specifies rights restrictions under an IP network address constraint
Description
Boolean - 1.3.6.1.4.1.1466.115.121.1.7Syntax
Single valuedOptions
If this attribute is TRUE, IP restrictions will be satisfied for unexceptional network
clients. If this attribute is FALSE, IP restrictions will be unsatisfied for
unexceptional network clients.
Remarks
hpqRoleIPRestrictions
1.3.6.1.4.1.232.1001.1.1.2.5OID
Provides a list of IP addresses, DNS names, domains, address ranges, and
subnets that partially specify right restrictions under an IP network address
constraint
Description
Octet String - 1.3.6.1.4.1.1466.115.121.1.40Syntax
MultivaluedOptions
This attribute is used only on role objects.Remarks
IP restrictions are satisfied when the address matches and general access is
denied. They are unsatisfied when the address matches and general access
is allowed.
Values are an identifier byte followed by a type-specific number of bytes that
specify a network address.
• For IP subnets, the identifier is <0x01>, followed by the IP network address
in network order, followed by the IP network subnet mask in network
order. For example, the IP subnet 127.0.0.1/255.0.0.0 would be
represented as <0x01 0x7F 0x00 0x00 0x01 0xFF 0x00 0x00 0x00>.
For IP ranges, the identifier is <0x02>, followed by the lower bound IP
address, followed by the upper bound IP address. Both are inclusive and
in network order. For example, the IP range 10.0.0.1 to 10.0.10.255
would be represented as <0x02 0x0A 0x00 0x00 0x01 0x0A 0x00
0x0A 0xFF>.
• For DNS names or domains, the identifier is <0x03>, followed by the
ASCII encoded DNS name. DNS names can be prefixed with an * (ASCII
0x2A), to indicate they must match all names that end with the specified
string. For example, the DNS domain *.acme.com is represented as
<0x03 0x2A 0x2E 0x61 0x63 0x6D 0x65 0x2E 0x63 0x6F 0x6D>.
General access is allowed.
HP Management Core LDAP OID classes and attributes 241