HP iLO 3 User Guide

1. Navigate to the Administration→Access Settings page, as shown in Figure 16 (page 40)
Figure 16 Access Settings page
2. Update the following settings as needed:
Table 1 Service settings
Default valueService setting
Enables you to specify whether the SSH feature on iLO is enabled or
disabled.
Secure Shell (SSH) Access
SSH provides encrypted access to the iLO CLP. The default is Enabled.
22Secure Shell (SSH) Port
17990Remote Console Port
80Web Server Non-SSL Port (HTTP)
443Web Server SSL Port (HTTPS)
17988Virtual Media Port
3. Click Apply to end your browser connection and restart iLO.
Wait at least 30 seconds before you attempt to re-establish a connection.
Configuring IPMI/DCMI settings
iLO enables you to send industry-standard IPMI and DCMI commands over the LAN. The IPMI/DCMI
port is set to 623 and is not configurable.
To enable or disable IPMI/DCMI, select or clear the Enable IPMI/DCMI over LAN on Port 623
check box, and then click Apply.
• Enabled (default)—Enables you to send IPMI/DCMI commands over the LAN by using a
client-side application.
• Disabled—Disables IPMI/DCMI over the LAN. Server-side IPMI/DCMI applications are still
functional when IPMI/DCMI over LAN is disabled.
Configuring access options
The Access Options section enables you to modify settings that affect all iLO users.
40 Configuring iLO