HP iLO 3 User Guide

To change the Remote Console Computer Lock settings:
1. Navigate to the Administration→Security→Remote Console page, as shown in Figure 27 (page
66).
Figure 27 Remote Console Computer Lock Settings
2. Modify the Remote Console Computer Lock settings as required:
• Windows—Use this option to configure iLO to lock a managed server running a Windows
operating system. The server automatically displays the Computer Locked dialog box
when a Remote Console session ends or the iLO network link is lost.
• Custom—Use this option to configure iLO to use a custom key sequence to lock a managed
server or log out a user on that server. You can select up to five keys from the list. The
selected key sequence is sent automatically to the server operating system when a Remote
Console session ends or the iLO network link is lost.
• Disabled (default)—Use this option to disable the Remote Console Computer Lock feature.
Terminating a Remote Console session or losing an iLO network link will not lock the
operating system on the managed server.
You can create a Remote Console Computer Lock key sequence by using the keys listed in
Table 5 (page 66):
Table 5 Remote Console Computer Lock keys
g1SCRL LCKESC
h2SYS RQL_ALT
i3F1R_ALT
j4F2L_SHIFT
k5F3R_SHIFT
l6F4L_CTRL
m7F5R_CTRL
n8F6L_GUI
o9F7R_GUI
p;F8INS
q=F9DEL
r[F10HOME
s\F11END
t]F12PG_UP
u'" " (space)PG_DN
va'ENTER
wb,TAB
66 Configuring iLO