HP iLO 4 Release Notes

ManualsBrandsHP ManualsComputer AccessoriesHP Integrated Lights-Out 4 (iLO 4) Firmware for ProLiant Gen8 Servers

1.50

HP Part Number: 684917-401

Published: May 2014

Edition: 1

Summary of content (8 pages)

PAGE 1
HP iLO 4 Release Notes 1.
PAGE 2
© Copyright 2014 Hewlett-Packard Development Company, L.P Confidential computer software. Valid license from HP required for possession, use or copying. Consistent with FAR 12.211 and 12.212, Commercial Computer Software, Computer Software Documentation, and Technical Data for Commercial Items are licensed to the U.S. Government under vendor's standard commercial license. The information contained herein is subject to change without notice.
PAGE 3
Description The HP iLO subsystem is a standard component of HP ProLiant servers that simplifies initial server setup, server health monitoring, power and thermal optimization, and remote server administration. The HP iLO subsystem includes an intelligent microprocessor, secure memory, and a dedicated network interface. This design makes HP iLO independent of the host server and its operating system.
PAGE 4
Devices supported • HP ProLiant BL660c Gen8 Server • HP ProLiant BL465c Gen8 Server • HP ProLiant BL460c Gen8 Server • HP ProLiant BL420c Gen8 Server • HP Proliant DL3000 Server • HP ProLiant DL580 Gen8 Server • HP ProLiant DL560 Gen8 Server • HP ProLiant DL385p Gen8 Server • HP ProLiant DL380p Gen8 Server • HP ProLiant DL380e Gen8 Server • HP ProLiant DL360p Gen8 Server • HP ProLiant DL360p Gen8 SE Server • HP ProLiant DL360e Gen8 Server • HP ProLiant DL320e Gen8 v2 Server • HP
PAGE 5
Fixes The following issues are resolved in this firmware version: • Auto Power On does not work on server blades after upgrading to iLO 4 v1.40. • SSH keys cannot be imported by using XML after upgrading to iLO 4 v1.40. • Random Embedded Flash/SD-CARD: Failed restart errors appear in the iLO 4 Event Log after server shutdown. • The Windows Server 2008 or 2012 installer might fail with the following error message when used with Virtual Media on iLO 4 1.32 and 1.
PAGE 6
Utility Minimum Version Version in Notes iLO 4 1.50 LOCFG.PL 4.20 4.20 Available in the HP Lights-Out XML Scripting Sample 4.3.0 bundle. HPLOMIG 4.20 4.3.0 Update to at least the minimum version of HPLOMIG before installing the iLO 4 1.50 update. • Some iLO 4 features are part of an iLO licensing package. For more information about iLO Licensing, see the following website: http://www.hp.com/go/ilo/licensing. • You must install Java Runtime Environment Standard Edition 1.4.
PAGE 7
Support • HP iLO 4 firmware updates and utilities can be found here: http://www.hp.com/support/iLO4 • • HP iLO 4 1.
PAGE 8
• There may be times when you run iLO Federation Management that you will receive a “data inconsistency error”. Those errors occur when an iLO on your network is not responding correctly refer to the multisystem map page to help troubleshoot that condition. • HP iLO 4 1.50 does not accept IPv6 multicast global scope configuration. Documentation feedback HP is committed to providing documentation that meets your needs.