HP Integrity and HP 9000 iLO MP Operations Guide, Fifth Edition

Command line usage and scripting

SNMP [ -status <e|d> ] [ -community [ <text> ] ] [ -nc ]

SO: Configure security options and access control

Command access level: MP configuration access

SO monitors and changes system wide security parameters.

The following are SO command parameters:

password after the connection is established. The

connection is interrupted when the timeout value is

reached (local console restarts the login; for all other

terminal types, the connection is closed). A timeout value

of 0 means there is no timeout set for the login.

Number of password faults allowed:

one to 10

This parameter defines the number of times a user can

attempt to log in before being rejected and having its

connection closed.

Web based to use SSL Enabled or disabled.

iLO MP reset Enables an iLO MP reset through IPMI from BMC, system,

or IPMI over LAN.

iLO MP password reset Enables iLO MP password reset through IPMI from BMC,

system, or IPMI over LAN.

Command line usage and scripting:

SO [ { -options [ -login <n> ] [ -number <n> ] [ -fwpci <e|d> ]

[ -reset <e|d> ] [ -pwdreset <e|d> ] }

| { -ss1 [ -name <text> ] [ -organization <text>] [ -unit <text> ]

[ country <text> ] [ -region <text> ] [ -locality <text> ]

[ -email <text> ] }

| { -ssh } ] [-nc ]

SS (System Status)

Command access level: Login access

SS displays the status of the system processors and which processor is the monarch.

The iLO MP learns the system configuration through the events it receives from the system.

There is usually a delay between any processor configuration change and what is displayed by

this command. For the most up-to-date processor configuration information, use the EFI or BCH

prompt.

Command line usage and scripting:

SS [ -nc ]