Installation Guide, Second Edition - HP Integrity BL60p Server Blade

Adding Additional Components

Service Tools Required

Chapter 3

Service Tools Required

Service of this product may require one or more of the following tools:

• IPF CPU Install Tool Kit, consisting of:

— Disposable ESD Kit

— Labelless CPU install tool (2.5 mm hex and Torx 15)

• 1/4-inch flat blade screwdriver

• Phillips No. 1 screwdriver

• ACX-10 Torx screwdriver

• ACX-15 Torx screwdriver

Adding a Hot-Plug SCSI Hard Disk Drive

Use the following procedures if the server blade has a hard drive blank installed, and you need to install a

hot-plug SCSI hard drive.

NOTE For a list of supported hard disk drives for the server blade, go the following link:

http://h18004.www1.hp.com/products/servers/Integrity-bl/p-class/60p/index.html

Step 1. Press the release buttons simultaneously.

Step 2. Pull the blank out of the drive bay.

Figure 3-1 Removing a Hard Drive Blank

Release buttons