Installation Guide, Second Edition - HP Integrity BL60p Server Blade

Chapter 8
Installing and Booting the Operating System
Operating System Boot and Shutdown
70
To boot the HP-UX operating system, do not type anything during the 10-second period given for
stopping at the HPUX.EFI loader.
Shell> map
Device mapping table
fs0 : Acpi(000222F0,269)/Pci(0|0)/Scsi(Pun8,Lun0)/HD(Part1,Sig72550000)
blk0 : Acpi(000222F0,269)/Pci(0|0)/Scsi(Pun8,Lun0)
blk1 : Acpi(000222F0,269)/Pci(0|0)/Scsi(Pun8,Lun0)/HD(Part1,Sig72550000)
blk2 : Acpi(000222F0,269)/Pci(0|0)/Scsi(Pun8,Lun0)/HD(Part2,Sig72550000)
blk3 : Acpi(000222F0,2A8)/Pci(0|0)/Scsi(Pun8,Lun0)
blk4 : Acpi(000222F0,2A8)/Pci(0|1)/Scsi(Pun2,Lun0)
Shell> fs0:
fs0:\> hpux
(c) Copyright 1990-2002, Hewlett Packard Company.
All rights reserved
HP-UX Boot Loader for IA64 Revision 1.723
Press Any Key to interrupt Autoboot
\efi\hpux\AUTO ==> boot vmunix
Seconds left till autoboot - 9
Step 5. Exit the console and MP interfaces when finished using them.
Press
^B (Control-B) to exit the system console and return to the MP Main Menu. To exit the MP,
type X at the Main Menu.
Single-User Mode HP-UX Booting
Use the following procedure to boot HP-UX in single-user mode.
Booting HP-UX in Single-User Mode (EFI Shell)
From the EFI Shell environment, boot in single-user mode by stopping the boot process at the
HPUX.EFI interface (the HP-UX Boot Loader prompt, HPUX>) and entering the boot -is vmunix
command.
Step 1. Access the EFI Shell environment for the system on which you want to boot HP-UX in single-user
mode.
Log in to the MP and enter CO to choose the system console.
When accessing the console, confirm that you are at the EFI Boot Manager menu (the main EFI
menu). If you are at another EFI menu, choose the
Exit option from the submenus until you return
to the screen with the EFI Boot Manager heading.
From the EFI Boot Manager menu, choose the
EFI Shell menu option to access the EFI Shell
environment.
Step 2. Access the EFI System Partition (fs
X : where X is the file system number) for the device from which
you want to boot HP-UX.
Step 3. When accessing the EFI System Partition for the desired boot device, issue the HPUX command to
initiate the \EFI\HPUX\HPUX.EFI loader on the device you are accessing.
Step 4. Boot to the HP-UX Boot Loader prompt (HPUX>) by pressing any key within the 10 seconds given for
interrupting the HP-UX boot process. Use the HPUX.EFI loader to boot HP-UX in single-user mode
in the next step.