User Service Guide, Second Edition - HP Integrity BL60p Server Blade

Appendix C
Utilities
Using the Boot Option Maintenance Menu
143
• Only one terminal emulation type (PcAnsi, Vt100, and so on) can be selected for each serial console, but
multiple serial consoles can be selected at a time.
Select Active Standard Error Devices
Use this option to define the devices that display error messages from the system console.
This menu is identical to Console Output Devices. The server blade does not support different configurations
for Output and Error console. For correct operation:
• When changes are made to either Output or Error console menus, the identical change must be made in
both menus.
• When changing serial devices, changes must be made to Output, Input, and Error menus for proper
operation.
Using the System Configuration Menu
The System Configuration Menu (on systems with EFI firmware version 2.0 or higher) includes the following
options:
• The Security/Password Menu lets you change the administrator and user passwords
• The Advanced System Information Menu displays information about system and component
configuration
• Set System Date lets you modify the system date
• Set System Time lets you modify the system time
• Reset Configuration to Default lets you restore system settings to their original configuration
• Help displays additional information about the available options
• Exit returns to the EFI startup menu
Security/Password Menu
You can set administrator and user passwords to provide different levels of access to the system firmware:
Resetting Passwords
If you forget your passwords, they can be reset using an MP command.
• Run the MP BP command to reset the MP and reset the password (see “Reset BMC Passwords” on
page 148” for more information).
NOTE You can only run this command when directly connected to the server blade.
Table C-6 Console Input Devices
To select: Choose:
MP Serial Console Acpi(HWP0002,700)/Pci(1|1)/Uart(9600 N81)/VenMsg(Vt100+)