User Service Guide, Second Edition - HP Integrity BL60p Server Blade

Console Setup and Connection
Accessing EFI or OS from iLO MP
Appendix D
166
LAN Ports on the Server Blade Enclosure
This section shows the location of the RJ-45 LAN ports on the back of the server blade enclosure, and how
they correspond with the Network Interface Controller (NIC) LEDs on the front of the server blade.
LAN / NIC Configuration
Table D-1 shows how the EFI and HP-UX LAN ports and front panel NIC numbers match up on the server
blade enclosure.
Port Locations on the Rear of the Server Blade Enclosure
The sever blade enclosure has eight rows of RJ-45 LAN ports. The rows correspond with the eight blade slots
of the enclosure. Each row has four ports (two on each side of the enclosure). The rows correspond with the
four NIC ports per server. Refer to Figure D-5 for the port locations.
Figure D-5 Port Locations on the Rear of the Server Blade Enclosure
Table D-1 LAN / NIC Server Blade Enclosure Configuration
Front Panel NIC # EFI LAN # HP-UX LAN#
NIC 1 A1 LAN0
NIC 2 A2 LAN1
NIC 3 B1 LAN2
NIC 4 B2 LAN3
Blade 1 NIC row (S1)
Blade 2 NIC row (S2)
Blade 3 NIC row (S3)
Blade 4 NIC row (S4)
Blade 5 NIC row (S5)
Blade 6 NIC row (S6)
Blade 7 NIC row (S7)
Blade 8 NIC row (S8)
Blade slot 3 Blade slot 1
Blade slot 2
Blade slot 4
Blade slot 5
Blade slot 6
Blade slot 7
Blade slot 8
NIC 4 ports
NIC 3 ports
NIC 1 ports
NIC 2 ports