Installation Guide, Second Edition - HP Integrity BL60p Server Blade

Adding Additional Components
Adding Internal Components
Chapter 3
39
Step 4. Assemble the processor and power pod by doing the following:
a. Carefully remove the processor and power pod from its packaging. Remove the pin cover and
any additional protective material from the processor and power pod. The processor and power
pod are not assembled for shipment, and must be put together before installation. See
Figure 3-7.
Figure 3-7 Power Pod and Processor Components
b. Assemble the power pod and processor together by sliding the processor board into the power
pod connector. See Figure 3-8.
Figure 3-8 Power Pod and Processor Module
Step 5. Remove the dust cover from the empty CPU 1 slot on the system board. See Figure 3-9.