Installation Guide, Second Edition - HP Integrity BL60p Server Blade

Configuring iLO MP Access

Configuring the RS-232 Port to Enable iLO MP Access

Chapter 5

Figure 5-2 Connecting a Terminal to the Server Blade

NOTE For more information about iLO MP functions, see the HP Integrity BL60p Server

Blade User Service Guide.

Step 3. Verify the parameters for RS-232 serial port communication are set to the following values on your

terminal or emulator device:

• VT 100 protocol

• 8/none (parity)

• 9600 baud

• None (receive)

• None (transmit)

Step 4. Click OK to set the parameters.

Step 5. If running an emulator, launch it now. You should be at the MP prompt. Proceed to Chapter 6,

“Accessing iLO MP,” on page 57.