Site Preparation Guide - HP Integrity BL60p Server Blade

System Specifications
System Configuration
Chapter 1
2
System Configuration
Figure 1-1 HP Integrity BL60p Server Blade
The following table describes the component options for the server blade.
Table 1-1 Minimum/Maximum Configuration
Component BL60p
Microprocessors One or two Intel® Itanium®2 1.6 GHz/3 MB L3 cache processor modules
Memory Supports up to 4 double data rate (DDR) PC2100 DIMMs.
Minimum memory is 1 GB (two 512 MB DIMMs).
Maximum memory is 8 GB (four 2 GB DIMMs).
Supported DIMM sizes: 512 MB, 1 GB, and 2 GB
HDDs Two low-profile hot-pluggable Ultra320 SCSI disk bays that support:
36 GB, 15K RPM SCSI disks; or
73 GB, 15K RPM SCSI disks; or
146 GB, 10K RPM SCSI disks
SCSI Two integrated Ultra320 SCSI drives with a single channel controller
LAN GbE LAN ports routed to enclosure backplane
Power supply -48 VDC power is supplied through the server blade enclosure backplane.