User Service Guide, Second Edition - HP Integrity BL60p Server Blade

Appendix C
Utilities
Specifying SCSI Parameters
136
Step 6. The “Adapter Properties” screen for this channel of the SCSI interface displays. Make sure the
utility is running for the channel of the SCSI interface by comparing the values shown for PCI Bus,
PCI Device, and PCI Function to the Bus #, Dev #, and Fnc # values from the info io
command.
CAUTION Do not change the value for any of these fields on the “Adapter Properties” screen:
• Auto Termination
• SCSI Parity
• SCSI Bus Scan Order
• Spinup Delay (Secs)
Changing any of these fields can cause unpredictable results.
CAUTION Do not change the value for any of these fields on the “Device Properties” screen:
• Scan Id
• Scan LUNs > 0
• Disconnect
• SCSI Timeout
• Queue Tags
• Format
• Verify
Changing any of these fields can cause unpredictable results.
Step 7. Display (and optionally change) any SCSI parameters listed below for the channel of the SCSI
interface, or restore its SCSI parameters to their default values.
• SCSI ID
• Maximum data transfer rate
•Bus width
• Whether the SCSI interface is bootable (driver support)
• Avoid bus resets (secondary cluster server)
•Restore Defaults
Step 8. Use the arrow keys to navigate to the appropriate SCSI parameter.
Step 9. Use the plus (
+) and minus (-) keys to scroll through the values until the value you want displays.
Step 10. Press
Esc to exit the “Adapter Properties” screen. You are given these choices:
• Cancel the exit from the screen (to stay in the “Adapter Properties” screen for the channel of the
SCSI interface)