User Service Guide, Second Edition - HP Integrity BL60p Server Blade

Appendix C
Utilities
Management Processor Command Interface
146
Management Processor Commands
MP commands are listed in Table C-7 and described in the following paragraphs. These commands should be
entered from the Command Menu. Type CM from the MP Main Menu to access the Command Menu,
Table C-7 Management Processor Commands and Descriptions
Command Description
BLADE Set server blade infrastructure parameters
BP Reset BMC passwords
CA Configure asynch/serial ports
CL View console log
CM Select command mode
<Ctrl+B> Return to MP main menu from any MP submenu
<Ctrl+N>rs Reset MP and allow password reset, user accounts are defaulted
CO Select console mode
DATE Date display
DC Default configuration
DF Display FRU information
DI Disconnect remote or LAN console
DNS Configure DHCP and DNS
FW Upgrade MP firmware
HE Display help for menu or command
ID System information
IT Inactivity timeout settings
LDAP Configure LDAP parameters and group administrators
LC LAN configuration
LM License management
LOC Locator LED display and configuration for server blade and enclosure
LS LAN Status
MA Return to Main Menu
PC Remote power control
PR Power restore
PS Power management module status
RB Reset BMC
RS Reset system through RST signal