User Service Guide, Second Edition - HP Integrity BL60p Server Blade

Appendix C
Utilities
Management Processor Command Interface
147
Blade Parameters
BLADE: Blade parameters configuration
This command allows you to configure the server blade infrastructure parameters.
Command line usage:
BLADE [ -rack <Rack name> ] [ -enclosure <Enclosure name> ]
[ -bay <Bay name> ] [ -nc ]
• Rack Name: The Rack Name is used to logically group together enclosures in a rack. The Rack Name is
shared with the other enclosures in the rack.
• Enclosure Name: The Enclosure Name is used to logically group together the blade servers installed in
the same enclosure. The Enclosure Name is shared with the other servers in the enclosure.
• Bay Name: The Bay Name is used to assist in identifying a blade.
• Bay Number: The blade enclosure can support as many as 8 servers. The bays are numbered (when
viewed from the rack front) from left to right from 1 to 8. The Bay number is used to locate and identify a
blade.
• Rack Serial Number: The Rack Serial Number identifies the components in the rack as a logical grouping.
• Enclosure Serial Number: The Enclosure Serial Number identifies a particular BLADE enclosure.
• Blade Serial Number: The Blade Serial Number identifies the serial number for the server.
SA Set access
SL Show event logs
SNMP Enable/disable the SNMP feature, set community string
SO Security options
SS System processor status
SYSREV Current system firmware revisions
TC Reset via transfer of control (TOC)
TE Tell- send a message to other users
UC User configuration
VFP Displays LED status as shown on the server blade
WHO Display connected management processor users
X Exit management processor and disconnect
XD Diagnostics and/or reset of management processor
Table C-7 Management Processor Commands and Descriptions (Continued)
Command Description