User Service Guide, Second Edition - HP Integrity BL60p Server Blade

Appendix C
Utilities
Management Processor Command Interface
150
• Reset LDAP and SNMP configuration parameters
• Reset User and Blade configuration parameters
• Session configuration (for example; setting the security configuration to default erases all users and
passwords)
There are three ways to reset passwords in the MP:
1. In the SO command, change individual users.
2. In the DC command, choose “Reset Security Configuration”.
3. Forgotten passwords can be reset by using the <Ctrl+N>rs command.
NOTE All user information (logins, passwords, and so on) is erased in methods 2 and 3.
Display FRUID
DF: Display FRUID information
This command displays FRUID information from the BMC for FRU devices. Information provided includes
serial number; part number; model designation; name and version number; and manufacturer.
Disconnect LAN Console
DI: DIsconnect LAN/WEB console
This command disconnects LAN/WEB users from MP. It does not disable the ports. The remote console is no
longer mirrored. The DI command also shows the number and type of current LAN based connections. Choose
any or all types:
DI
Current user access state:
T - Telnet : Disconnected
W - Web SSL : Disconnected
H - SSH : Disconnected
Enter parameter(s) to change, A to disconnect All, or [Q] to Quit:
Domain Name Server Settings
DNS: Domain name server settings
This command configures the DNS server settings. DHCP must be enabled for this command to work. DNS
lets you configure DNS Domain Name and DNS servers (up to 3) either manually or automatically though
DHCP. It further allows a DDNS update through the primary DNS server as long as it is authoritative for the
zone.
MP Firmware Update
FW: Activates MP firmware upgrade mode
This command is available from either the LAN or local serial port. This command activates firmware
upgrade mode, which loads new firmware through the MP LAN by FTP (which must be operational). An MP
Reset is generated after the upgrade is complete.