User Service Guide, Second Edition - HP Integrity BL60p Server Blade

Appendix C
Utilities
Management Processor Command Interface
151
Help
HE: Display help for menu or command
This command displays the MP hardware and firmware version identity, and the date and time of firmware
generation. If executed from the MP Main Menu, general information about the MP, and those commands
displayed in the MP Main Menu, will be displayed. If executed in command mode, this command displays a
list of command interface commands available to the user. It also displays detailed help information in
response to a topic or command at the help prompt.
Display System ID
ID: Display/modify system information
This command allows the user to display and modify the following:
SNMP contact information
SNMP server information
SPU hostname
Inactivity Timeout
IT: Inactivity Timeout settings
The session inactivity timeout is up to 1,440 minutes—default is 60 minutes. This timeout prevents sessions
to the system from being inadvertently left open. A session can be started by the SE command. An open
session can prevent users from logging onto the MP through a port and can also prevent system applications
from initiating an outbound connection.
MP inactivity timeout is up to 1,440 minutes—default is 5 minutes. This timeout prevents a user from
inadvertently keeping the MP locked in a MP Command Interface mode preventing other users from looking
at the console output. The MP Command Interface inactivity. timeout may not be deactivated.
Flow control timeout is 0 to 60 minutes. If set to 0, no timeout is applied. This timeout prevents mirrored flow
control from blocking other ports when inactive.
Configure LAN Console
LC: LAN configuration (IP address, and so on)
This command displays and allows modification of the LAN configuration. Configurable parameters include:
•MP IP Address
•MP Host Name
DHCP status (also able to set the Web and SSH access ports)
SSH Access Port number
Subnet Mask
Gateway Address
Web Console port number
•Link State