User Service Guide, Second Edition - HP Integrity BL60p Server Blade

Console Setup and Connection
Configuring iLO MP Access
Appendix D
161
Figure D-3 MAC Address Location
Step 2. Connect a LAN cable on your local subnet to the core iLO MP LAN port on the rear of the server
blade enclosure (if not already connected). Refer to Figure D-4.
Figure D-4 iLO MP LAN Port
Step 3. Locate a UNIX or PC node on the same LAN segment.
Step 4. Add a route to iLO MP using the route add command.
MAC address
label
LAN cable
management module
iLO MP LAN port
Enclosure