HP Integrity iLO 3 Operations Guide

The LC command displays and modifies the LAN configuration parameters.
The LC command sets next boot LAN settings. It does not display the current settings. Use the LS
command for that purpose. The LC no longer does an automatic reset but advises that a reset is
needed to make the changes you performed.
IMPORTANT: If you are connected through a network and you make any changes to DHCP
status, IP address, subnet mask, or gateway IP address, iLO 3 alerts you to manually reset iLO 3
when you confirm the change (see below).
Figure 4 Reset dialogue from TUI (SSH/Telnet/RSC)
If you are connected through a serial console and you make any changes to DHCP status, IP
address, subnet mask, or gateway IP address, iLO 3 alerts you to manually reset iLO 3 (see below).
Figure 5 Reset window from web GUI
Text user interface 57