HP Virtual Connect for c-Class BladeSystem Version 3.00 Setup and Installation Guide for HP Integrity BL8x0c i2 Series Server Blades, Fifth Edition

HP Virtual Connect Manager 79
Finish domain wizard
Click Finish to complete this wizard, and then run the Network Setup Wizard ("HP Virtual Connect
Network Setup Wizard" on page 79) to define the Ethernet networks that will be available within the
Virtual Connect domain.
Deselect the Start the Network Setup Wizard checkbox, and then click Finish to go to the Home page.
HP Virtual Connect Network Setup Wizard
This wizard establishes external Ethernet network connectivity for the HP BladeSystem c-Class enclosure
using HP Virtual Connect. A user account with network privileges is required to perform these operations.
Use this wizard to do the following:
• Identify the MAC addresses to be used on the servers deployed within this Virtual Connect domain.
• Choose the method of handling VLAN tagged packets from servers.
• Set up connections from the HP c-Class enclosure to the external Ethernet networks.
These connections can be uplinks dedicated to a specific Ethernet network or shared uplinks that
carry multiple Ethernet networks with the use of VLAN tags.
Be sure to connect any Ethernet module stacking cables before running the setup wizard.
IMPORTANT: For a Virtual Connect environment to operate properly, all for HP Integrity
BL8x0c i2 Series Server Bladess within the Virtual Connect domain must be interconnected
with stacking links. HP strongly recommends that redundancy be maintained in stacking links
to ensure continued connectivity of servers to the external networks.