HP Integrity BL860c i2, BL870c i2 & BL890c i2 Server Blade Installation Guide

3. Install the server blade.
The server blade should come up to standby power. The server blade is at standby power if the
blade power LED is amber.
Server blade power states
The server blade has three power states: standby power, full power, and off. Install the server
blade into the enclosure to achieve the standby power state. Server blades are set to power on to
standby power when installed in a server blade enclosure. Verify the power state by viewing the
LEDs on the front panel, and using Table 1.
For more front panel LED information, see the HP Integrity BL860c i2, BL870c i2 & BL890c i2
Server Blade User Service Guide.
10 Installing the server blade into the enclosure