HP Integrity BL870c Server Blade Installation Guide

4. Install the processor into the server by lining up the alignment pins on the processor with the
holes in the processor slot.
The processor load order is to load the processors into slot 0 and slot 1 on the right side of
the system board; then slot 2 and slot 3 on the left side of the system board.
For slot locations on the system board, see Figure 9.
Figure 9 Processor Slot Identification
5. Ensure the processor is seated by pressing down gently on the processor.
The processor should not move, or rock back and forth. Reseat the processor if necessary.
6. Slide the processor sequencer to the right (1) to expose the ZIF socket on the system board
(2), as shown in Figure 10 (page 18).
Installing Additional Components 17