HP Integrity BL860c i2, BL870c i2 & BL890c i2 Server Blades - WEEE (Waste from Electric and Electronic Equipment) Disassembly Instructions

Product Disassembly Process
The following table lists the basic steps that you should follow to remove components and
materials requiring selective treatment.
ProcessStep
Battery – locate battery and remove by hand or small flat
blade screw driver.
1
Capacitor – locate capacitor and pry from the printed
circuit board with a large flat head screw driver.
2
Printed Circuit Boards – follow removal instructions
found in the system specific documentation if needed.
3
8 Product End-of-Life Disassembly Instructions