HP Integrity iLO 3 Operations Guide

Table 24 Local Accounts description
DescriptionItem
To edit or delete a user account, select an existing user from the list of user names and
click Edit or Delete to either edit or delete that user account.
Select User
To create a new user account, click New. This opens a page that enables you to enter
account information for the new user. By default, a new user is granted the Remote
New
Console Access and Virtual Media rights. The operating mode is set to multiple logins,
and the user is enabled.
Click this button after selecting the user account to modify or to add a new account. For
an existing account, you can modify any of the parameters shown, provided the user
has sufficient privileges.
Edit
Clicking Edit or New brings up a page that enables a user to enter the following user
account information:
Login ID This field is required. This is the name that must be
used when logging in to the iLO MP. The Login ID must
be unique. The maximum length is 24 characters.
Password This field is required. The password must be provided
when logging in to iLO 3. The password must be a
minimum of 5 characters and can contain a maximum
of 24 characters.
Password Confirmation This field is required. The password must be provided
a second time for verification.
User Name This field is required. This name appears in the user
list and on the home page. It is not necessarily the
same as the Login ID. The User Name must be unique.
The maximum allowed length is 24 characters.
Workgroup This field is optional, and can be initialized to an
intuitive name.
Access Rights iLO MP user privileges control user access to the iLO
MP functions that a user can perform. You can
configure iLO 3 users to have any (or all) of the
following privileges: Remote Console Access, Virtual
Power & Reset, Configure iLO Settings, Administer
User Accounts, and Virtual Media.
For more information on access rights, see the User
Rights page located under the Help tab.
Operating Mode Multiple logins allow a user to log in more than once.
If the mode is Single, the state is changed to disabled
after the first login.
User Enabled/Disabled Enabled allows a user to log in to the iLO MP. If
disabled is selected, the user will not be able to log in
to the iLO MP.
Click this button after selecting the user account to delete. If you do not have the User
Administration Access right, this button is disabled.
Delete
NOTE: You must configure the HP System Insight Manager group actions feature for iLO 3 to
use an existing iLO user name.
To configure, manually edit the MpTools.xml file and replace the <execute-as-user> attribute
with an existing user name on the iLOs. This new user name must have all access rights. To find
the MpTools.xml file, look in the tools directory on the Central Management Server.
Additionally, iLO 3 supports user accounts created for login from the BladeSystem Onboard
Administrator. These user accounts appear as OAtmp#, where # is a number from 1-5. Removing
the BladeSystem Onboard Administrator user accounts is not recommended.
Relevant iLO MP TUI command: UC
100 Using iLO 3