HP Integrity iLO 3 Operations Guide

Table 26 LAN description (continued)
DescriptionItem
The default SSH port number is 22. You can configure this port number to a value in the
range 2000-2400. If the port number is modified, it takes effect the next time iLO 3 is
rebooted. To secure an SSH connection, select Enable and ensure that an SSH key pair
has been generated.
SSH is an industry-standard client-server connectivity protocol that provides a secure
remote connection. The iLO 3 firmware supports:
• SSH2 implementation
• Authentication algorithms RSA and DSA
• Encryption algorithms 3DES-CBC and AES128-CBC
• Integrity algorithms HMAC-SHA1 and MD5
Indicates if a key pair has been generated previously. To generate a new SSH key pair,
check Generate New Key Pair and click Submit.
Key Pair Status
You can enable or disable the web SSL access to iLO 3 using the enable or disable
option. To make an SSL connection, you must generate a certificate. The certificate status
indicates if a certificate has been generated previously.
Web SSL
The port value is 443. You cannot change it.
To generate a new certificate, fill in the fields shown and select Generate New Certificate.
The system alerts you when the certificate is about to expire or if it has already expired.
You will need to generate a new certificate before you can continue.
You must reset the iLO MP after you generate a new certificate.
The iLO MP auto generates an SSL certificate when it is first powered on at initial
installation. It is expected that you will generate a new certificate with valid information
Certificate Status
when you log in. The certificate status indicates if a certificate has been generated
previously. To generate a new certificate, select Generate New Certificate, fill in the
fields, and click Submit.
The Remote Serial Console default port value is 2023. You can configure it to a value
in the range 2000-2400. If the port number is modified, it takes effect the next time iLO
3 is rebooted.
Remote Serial Console
The Integrated Remote Console feature will be available in a future firmware release.Integrated Remote Console
The Virtual Media default port value is 17988. You cannot change it.Virtual Media
Submits the information.Submit
Cancels the action.Cancel
Relevant iLO MP TUI commands: LC, SA, SO
Serial
The Serial tab enables you to set the serial port parameters. To change the external serial port
mode, the iLO baud rate, and the iLO flow control settings, you must have the Configure iLO
Settings user right.
104 Using iLO 3