HP Integrity iLO 3 Operations Guide

Figure 36 Standard network settings
Table 30 Standard network settings description
DescriptionItem
Displays the 12-digit (hexadecimal) MAC address.MAC Address
To enable iLO 3 to obtain an IP address, Subnet Mask, and Gateway Address from a
DHCP server, select Enable. Changes to those three network settings are not allowed
while the DHCP Status is enabled.
DHCP Status
To manually assign those three network settings to iLO 3, select Disable. If the DHCP
status is changed and submitted, a reset of iLO 3 is required for the changes to take
effect.
Displays the host name set at the iLO 3 TUI prompt. Typically, the DNS name for the
LAN IP is entered. This field can be programmed to any useful name or phrase.
iLO 3 MP Host Name
Displays the iLO 3 MP IP address. If DHCP is being used, the IP address is automatically
supplied. If not, enter a static IP address here. If the IP address is changed to a valid
address and submitted, a reset of iLO 3 is required for the changes to take effect.
IP Address
Displays the subnet mask for the iLO 3 IP network. If DHCP is being used, the subnet
mask is automatically supplied. If not, enter the subnet mask for the network. If the subnet
Subnet Mask
mask is changed to a valid mask and submitted, a reset of iLO 3 is required for the
changes to take effect.
Displays the IP address of the network gateway. If DHCP is being used, the gateway IP
address is automatically supplied. If not, enter the network gateway address. If the
Gateway Address
gateway address is changed to a valid address and submitted, a reset of iLO 3 is required
for the changes to take effect.
Select Auto Negotiate, 10BaseT, or 100BaseT.Link State
Web GUI 109