HP Integrity iLO 3 Operations Guide

Table 30 Standard network settings description (continued)
DescriptionItem
IMPORTANT: On Integrity rx2800 i2/i4 systems, the link state 1000BaseT option (or
Duplex Option) is not currently supported.
Integrity rx2800 i2/i4 systems can run at 1000BaseT, but only if the switch it connects
to supports auto negotiate to 1000BaseT and the rx2800 i2/i4 is similarly set to auto
negotiate. If you want to set a specific LAN speed (10BaseT or 100BaseT) those are the
only options that iLO 3 currently supports.
Submits the information.Submit
Cancels the action.Cancel
Relevant iLO MP TUI command: LC
Domain Name Server
The Domain Name Server (DNS) tab enables you to configure the DNS server settings, domain
name, and up to two DNS servers manually or automatically through DHCP. It further enables a
DDNS update through the primary DNS server as long as it is authoritative for the zone. It is only
meaningful when used with DHCP enabled. To use this feature, you must have the Configure iLO
Settings user right.
You can only configure the DNS server if DHCP is enabled.
Figure 37 Domain Name Server
110 Using iLO 3