HP Integrity iLO 3 Operations Guide

Table 32 Onboard Administrator description
DescriptionItem
Displays the IP address of the OA.
IMPORTANT: Integrity iLO 3 must have a reachable IP address as the default gateway
address. Since the OA is reachable, HP recommends using the OA IP address as the
gateway address for Integrity iLO 3. If you use the Enclosure IP mode, this solution works
during a failover. In the Enclosure IP mode, a static IP address is assigned to the active
OA, and during a failover, the same IP address follows the active OA. If the OA IP
address is assigned using DHCP, the solution does not work. In such instances, HP
recommends manually changing the iLO 3 gateway address.
OA IP Address
Displays the MAC address of the OA.OA MAC Address
Click this button to launch the OA Sign In page.Active OA Sign In Page
Used to logically group together enclosures in a rack. The rack name is shared with the
other enclosures in the rack.
Rack Name
The rack universal unique identifier.Rack UID
The bay number is used to locate and identify the monarch blade.Bay Number
Lists bay numbers in the enclosure populated by blades that are part of this server or
partition.
Bays Consumed (full height)
Used to logically group together the server blades installed in the same enclosure. The
enclosure name is shared with the other servers in the enclosure.
Enclosure Name
Displays the health of the enclosure.Enclosure Health
OK Normal operation, any issues have been acknowledged.
Degraded Typically loss of redundancy or partial failure of a component.
Critical Failure with loss or imminent loss of system function.
Enables you to turn the enclosure Locator UID LED on or off.Locator UID LED
Relevant iLO MP TUI commands: BLADE, LOC
Before setting up the HP BladeSystem OA, HP recommends that you read the HP BladeSystem
Onboard Administrator User Guide on the HP website at HP BladeSystem c-Class Onboard
Administrator. Reading this guide ensures that you obtain an overall understanding of the HP
BladeSystem OA and that you properly complete the initial setup to facilitate proper functioning
of the OA.
Help
The iLO 3 has a robust help system.
To access iLO 3 help, click the ? at the top right corner of each page.
Select any of the topics listed in the left navigation bar to access that particular help screen.
112 Using iLO 3