HP Integrity iLO 3 Operations Guide

To remove any of the entries, highlight the entry in the display field and click Delete.

Setting Lights-Out management device rights

After you create a role, you can select rights for the role and make users and group objects members

of the role, which gives users or groups of users the rights granted by that role. To manage rights,

use the Lights-Out Management Device Rights subtab of the HP Management tab.

Figure 59 Lights-Out management device rights tab

Table 34 Management Device Rights

DescriptionOption

This option controls whether users can log in to the associated devices and issue status

or read-only commands (view event logs and console logs, check system status, power

status, and so on) but not issue any commands that might alter the state of iLO 3 or the

system.

This option enables users to access the system console (the host operating system).Remote Console

This option enables users to connect devices through the network such as CD, DVD, and

network drives as virtual devices.

Virtual Media

This option enables users to issue iLO 3 power operations to remotely power on, power off,

or reset the host platform, as well as configure the system power restore policy.

Server Reset and Power

This option enables users to administer local iLO 3 user accounts.Administer Local User

Accounts

This option enables users to configure all iLO 3 settings, as well as reboot iLO 3.Administer Local Device

Settings

Installing snap-Ins and extending schema for eDirectory on a Linux platform

This section describes a method that does not require a Windows client to install snap-ins and

extend schema for eDirectory on a Linux platform.

Schema extension is the addition of new classes to existing classes. You can use these classes to

create objects to support a specific utility. New classes are added, such as hpqTarget,

hpqPolicy and hpq role. HP has created objects using these classes to support iLO 3 devices

(created using the hpqTarget class), and iLO 3 administrators and monitors (created using the

134 Installing and configuring directory services