HP Integrity iLO 3 Operations Guide

When iLO is in Security Override mode, all authentication is suspended for 15 minutes, or
until someone exits Security Override mode by performing any of the following actions:
◦ Pressing the Physical Presence button less than 4 seconds
◦ Manually exiting through the iLO TUI's SO command
◦ Manually exiting through the iLO GUI's Access Settings web page
1. The system administrator should examine both the IEL and SEL to determine the cause of
the login failures. (Login Delay must be cancelled before you can login to iLO to view the
IEL and SEL.)
2. TBD
HP Integrity server blade components
For port locations and console connection procedures, see your server blade documentation. Also,
for HP server blades, see the c3000 or c7000 Enclosure documentation and The BladeSystem
Onboard Administrator documentation.
HP BladeSystem Enclosures
c7000 Enclosure
The HP BladeSystem c7000 Enclosure is an evolution of the entire rack-mounted infrastructure. It
consolidates and repackages all the supporting infrastructure elements — compute, storage,
network, and power into a single infrastructure-in-a-box that accelerates the integration and
optimization of the data center.
It is optimized for enterprise data center applications. It fits into standard size HP and third-party
racks; accommodates BladeSystem c-Class server blades, storage blades, and interconnect modules;
and provides all the power, cooling, and I/O infrastructure needed to support them.
For information on port locations and console connection procedures, see the HP BladeSystem
c7000 Enclosure setup and installation guide on the HP website at http://h20000.www2.hp.com/
bizsupport/TechSupport/DocumentIndex.jsp?contentType=SupportManual.
c3000 Enclosure
The HP BladeSystem c3000 Enclosure is similar to the c7000. The Intelligent Management through
the Onboard Administrator gives you complete control of your bladed infrastructure. For information
on port locations and console connection procedures, see the HP BladeSystem c3000 Enclosure
setup and installation guide on the HP website at on the HP website at http://
h20000.www2.hp.com/bizsupport/TechSupport/HPBladesystemc3000Enclosure.
Onboard Administrator
The BladeSystem Onboard Administrator (OA) for the HP BladeSystem c7000 Enclosure is the
enclosure MP, subsystem, and firmware base used to support the HP Integrity server blades and
all the managed devices contained within the enclosure. Together with the enclosure HP Insight
Display, the Onboard Administrator has been designed for both local and remote administration
of HP BladeSystem c-Class.
This module and firmware provides:
• Wizards for simple, fast setup and configuration
• Highly available and secure access to the HP Bladesystem infrastructure
• Security roles for server, network, and storage administrators
• Automated power and cooling of the HP Bladesystem infrastructure
• Agent-less device health and status
HP Integrity server blade components 21