HP Integrity iLO 3 Operations Guide

• Thermal Logic power and cooling information and control
• email or Insight Display communications of problems within the enclosure
Each c7000 Enclosure is shipped with a first Onboard Administrator module/firmware. If needed,
you can order a second redundant Onboard Administrator module for each enclosure. When two
Onboard Administrator modules are present in a c7000 Enclosure, they work in an active - standby
mode, assuring full redundancy of the c7000 Enclosure integrated management.
Before setting up the HP BladeSystem OA, HP recommends that you read the HP BladeSystem
Onboard Administrator User Guide on the HP website at HP BladeSystem c-Class Onboard
Administrator.
Reading the guides ensures that you understand the HP BladeSystem OA and that you properly
complete the initial setup to facilitate its proper functioning.
Integrity rx2800 i2/i4 servers
For complete information on the HP Integrity rx2800 i2/i4 server, such as server components,
ports, LEDs, and specifications, see the HP Integrity rx2800 i2 Server User Service Guide and HP
Integrity rx2800 i4 Server User Service Guide on the HP website at http://www.hp.com/go/
Integrity_Servers-docs.
22 Ports, buttons, LEDs, and components