HP Integrity iLO 3 Operations Guide

Table 11 Command menu commands (continued)
DescriptionCommand
Configure LDAP parametersLDAP
View current license statusLM
Locator LED configurationLOC
Current LAN settingsLS
Remote power controlPC
Power regulator modePM
Set the power restore policyPR
Power management module statusPS
Reset the system through the RST signalRS
Configure remote, LAN, Telnet, and web access optionsSA
Configure security optionsSO
Display all firmware revisionsSYSREV, SR
Display system processor statusSS
System settingsSYSSET
Transfer of control (TOC) - System reset through the INIT signalTC
Tell - send a message to other usersTE
User configurationUC
Display a list of connected usersWHO
Turn the Wake-On-LAN feature On or Off for system LANsWOL
Diagnoses or resets iLO 3XD
The following is a quick reference list that provides MP Command mode activities:
• To access the Command menu, enter CM at the MP Main Menu.
• To see all the available commands, enter HE at the CM:hpiLO-> prompt, and then enter LI.
• To modify the inactivity timeout, enter the IT command. The inactivity timer aborts a command
if you do not complete it within a certain time period and redirects you back to the command
prompt.
• To abort most commands, enter Q at the point when the iLO 3 MP is asking for input.
• To return to the MP Main Menu from any of these commands, press Ctrl-B.
Command-line interface scripting
A command-line interface is provided for all commands to assist you in scripting. This section
provides syntax examples used in the iLO 3 MP command-line or scripted interface.
Typically, tools like Expect (see “Expect script example” (page 49)) and (http://expect.nist.gov/)
are used to string together several commands to accomplish a task. These scripting tools enable
48 Using iLO 3