HP Integrity iLO 3 Operations Guide

occurs. However, if a local port user enters a login name, sits at the hpilo-> Password:

prompt, and a timeout occurs, then this login is cancelled and the hpilo-> Login: prompt

reappears.

• Number of password faults allowed: 1 to 10. This parameter defines the number of times a

user can attempt to log in to a console before being rejected and having its connection closed.

• SSL certificate: Enables the generation of SSL certificates.

NOTE: If you specify the certificate using the command line, then you must specify every

parameter.

• SSH keys generation: Enables SSH keys authorization.

Command line usage and scripting:

SO [ { -options [ -login <n> ] [ -number <n> ]

[ -security_overide disable ]}

| { -ss1 [ -name <text> -organization <text> -unit <text>

-country <text> -region <text> -locality <text>

-email <text> ] }

| { -ssh } ] [-nc ]

SO -?

SYSREV, SR: Firmware revisions

Command access level: Login access

The SYSREV, SR command displays the current firmware and hardware revisions in the system.

Command line usage and scripting:

SYSREV [ -nc ]

SYSREV -?

NOTE: You can only directly obtain system firmware revision information when the system power

is off.

SS: System processor status

Command access level: Login access

The SS command displays the status of the system processors in the system and which processor

is the monarch.

For both server blades and rackmount servers, use the SS command from the MP CLI interface for

an instantaneous power reading.

The iLO 3 learns the system configuration through the events it receives from the system. There is

usually a delay between any processor configuration change and what is displayed by this

command. For the most up-to-date processor configuration information, use the UEFI prompt.

Command line usage and scripting:

SS [ -nc ]

SS -?