HP Integrity iLO 3 Operations Guide

The default user is Administrator. The Administrator user has all rights (C, P, M, U,

and V). You can change the configuration of the Administrator with the UC command.

All users have the right to log in to iLO 3 and to run Status (read-only) commands (view event logs,

check system status, power status, and so on), but not to run any commands that alter the state of

iLO 3 or the system.

The following commands are available to all users: DATE, DF, HE, LOC, LS, PS, SL, SS, SYSREV,

TE, VFP, WHO, XD (LAN status only)

There are two menu items:

• ping, can be used by all users

• reboot, limited to certain users

An iLO 3 user can also have any or all of the following access rights:

Console access Right to access the system console (the host operating

system). This does not bypass host authentication

requirements, if any.

Command: CO

Power control access Right to power on, power off, or reset the server, and to

configure the power restore policy.

Commands: PC,PR, RS, TC

Local user administration access Right to configure locally stored user accounts.

Commands: UC

MP configuration access Right to configure all iLO 3 MP settings (and some system

settings, such as the power restore policy).

Commands: CA, CL, DC, DI, FW, ID, IT, LC, LDAP, LOC,

PG, SA, SO, XD

Virtual Media access Right to use the vMedia applet.

Command line usage and scripting:

UC [ -new <login> —user <text> [ -workgroup <text> ]

[ -mode <single|multiple> ] [ -enable <e|d> ]

[ -password <value> ] ]

[ -change <login> [-login<newlogin> ] [ -user <text> ]

[ -workgroup <text> ] [ -mode <single|multiple> ]

[ -enable <e|d> \ [ -password [ <value> ]

[ -delete <login> ] | [ -list <login> ] ] [ -nc ]

UC -?

Example:

[gstlhpg1] CM:hpiLO-> uc -delete Oper -nc

UC -delete Oper -nc

Current User Parameters:

User Login ID : Oper

User Password : ************

User Name : Default Operator

User Workgroup :

User Access Rights : Console access, Virtual Media

User Operating Mode : Multiple

User Enabled/Disabled : Enabled

-> Current User will be deleted

66 Using iLO 3