HP Integrity iLO 3 Operations Guide
Command line usage and scripting:
XD [ -lan <ipaddr> | -reset ] [ -nc ]
XD -?
Web GUI
When using the iLO 3 web GUI, keep the following information in mind:
• To successfully log in to the iLO 3 web GUI, you must enable cookies on the web browser.
• The appearance of the web GUI pages might differ depending on your server.
• Different browser applications must be used to perform multiple logins to the same iLO from
a single client.
Accessing the iLO 3 web GUI
1. Open a web browser and enter the DNS name or the IP address for the iLO 3.
The Integrated Lights-Out 3 log in page appears.
Figure 6 iLO 3 web GUI log in
2. Log in using the default iLO 3 user name and password (Administrator/password found on
the iLO Network Information Tag).
NOTE:
• On server blades, the iLO Network Information Tag is located on the right side of the
monarch blade.
• On HP Integrity rx2800 i2/i4 servers, the iLO Network Information Tag is located on a
pull-tab on the front panel.
68 Using iLO 3