HP Integrity iLO 3 Operations Guide

Figure 14 iLO Health
Table 18 iLO Health descriptions
DescriptionItem
Resets sets all iLO parameters to the default values.Reset the iLO to Default
Configuration
All iLO parameters retain their current values. Note: iLO reset is disabled during a firmware
upgrade.
Reset iLO
Submits your request to the systemSubmit
iLO Self Test Results
The status of non-volatile RAM.NVRAM
The status of the EEPROM.EEPROM
Relevant iLO MP TUI commands: DC, XD -R
iLO Event Log
The log viewer enables you to view the contents of the iLO Event Log stored in nonvolatile memory.
Web GUI 77