HP Integrity iLO 3 Operations Guide
Power Management
The iLO 3 power management feature enables you to view and control the power state of the
server, monitor power usage, and monitor the processor. You must have the Virtual Power & Reset
user right to choose options on the power pages except where stated that the Configure iLO Settings
user right is required.
The Power Management menu has the following options:
• Power & Reset
• Power Meter Readings
• Power Regulator & Capping
The pages are automatically refreshed every 10 seconds.
Power & Reset
The Power & Reset page enables you to view and control the power state and power options of
the server. To choose options on this page, except where stated that the Configure iLO Settings
right is required, you must have the Virtual Power & Reset right.
Figure 25 Power & Reset
For information on how to set the power management options in the OA, see the HP BladeSystem
Onboard Administrator User Guide on the HP website.
Table 20 Power & Reset description
DescriptionItem
The current power state of the system.System Power
Power control access enables you to issue the following options for remote control of the
system power:
System Power Control
Graceful Power Off The iLO 3 sends a signal to the operating system
to shutdown before turning off system power.
Supported by IPF operating systems.
Web GUI 91